Morningstar produces the best controllers I have come across. I have owned probably more than 50 other controllers, primarily going through every no-name model with the hopes that the company will survive the warranty.
So Why am I selling?
I'm too old to deal with the weight of the batteries and keeping up with all that is involved in operating your own electrical grid.
The benefit of these units is that it doesn't matter what incoming voltage or ams is being received from the solar array, the charger will convert the energy for your specific battery bank regardless of whether you have a 12v, 24v, or 48v battery bank.
The limit on incoming voltage from your solar array is up to 150v incoming or 60a (whichever comes first, higher series solar arrays will typically not concerned with maxing out the amps and is capped at 150v (the most I ever used was 5 panels in series to create a 60v input which typically will peak at about 107v). The amps cap is for the solar arrays that are not in series but have multiple panels in parallel. 60 amps is the cap used typically by the non-series arrays.
THERE ARE NO PLASTICS WITH THIS UNIT, it is all steel with the exception of the circuit board.
*Comes with a very helpful easy-to-understand and comprehensive Digital User Manual
Units come with the standard solid face plate but have digital face plates as an optional item ($65.00).
There are other accessories readily available online for this model of solar Charge Controller.